1/14 RC Hydraulic Dump Truck 8x8 2019 Version

Short description of the product is being updated ...

Price includes shipping

1:14 tractor remote control hydraulic dump truck model 8X8 Tamiya mud head engineering vehicle static point

     Proportion: 1:14

Size: length 680, width 210, height 160, unit MM

Weight: 10.3KG, plus remote control 10.8KG

The weight of the whole vehicle plus packaging is 15 kg.

Theoretical load: 15KG

Total load mass: 24.5KG

Remote control: FS-i6S (6 channels)

Battery and lamp set must be purchased separately, long 150mm wide 45MM high 40MM size 3S lithium battery, voltage can not be lower than 11.1V

Hydraulic oil requires No. 32 or No. 46

Teleoperation video: https://v.youku.com/v_show/id_XMzY1OTcxNjI0NA==.html?spm=a2hzp.8244740.0.0

Gearbox: The latest planetary gearbox with static point model, shape simulation. Compact structure, simulated zipper shifting. The torque is large and can be shifted during travel. Reduction ratio 1st gear 1:64 second gear 1:6

Power: Strong magnetic high twist brushed 35T540 motor, can be replaced with carbon brush. The measured weight of the whole vehicle is 30 kg and 45 degrees steep slope.

Front suspension: The lever swing arm type balanced suspension increases the swing amplitude of the front axle and improves the passing performance of the truck.

Rear suspension: a small piece of lightweight parabolic steel plate with a good load-bearing ratio and large elasticity, so that each tire is evenly grounded.

Drive axle: Zinc alloy simulation single-stage reduction bridge shape design, remote control differential lock, improve the passability of dump truck. The hexagonal adapter adopts a static point model bushing structure for higher mounting accuracy.

Steering: Double-link steering system, the steering gear is installed between the girders, position simulation, 17KG steering gear drive steering torque is large, and each link can be combined to form different steering angles to reduce steering resistance.

Wheel hub: 10-hole heat-dissipating vacuum tire ring structure with bright anode on the surface.

Tires: Specifications 315/80/R22.5, diameter 86.5MM, width 22MM, deep groove pattern, improve grip.

Transmission shaft: equipped with static point model, initial V-type involute angle drive shaft, spline structure, large torque shape simulation, and Pengbai power passed by me.

Cylinder: 5-stage multi-stage cylinder, diameter 37MM, stroke 115MM, pressure 5MP, link with static point model oil pump set, theoretical thrust 400KG


Oil pump: 2814 brushless motor drive, rated pressure 3.5-5MPA, flow 0.42L/MIN. Small size and high efficiency, driven by 40A brushless ESC.

Front buckle: buckled structure, easy to replace battery. The structure is novel. When the lock is pulled open, the car shell will automatically bounce.